Skip to content

Noise Meter for Classroom with Bouncy Balls

Show the class how loud they are. Free, no sign-up.

Noise meter

Ready when you are

0%

Warnings 0

Microphone is off. Press Start to begin.

Ball style

A free noise meter for classroom use that runs in the browser. Turn on the microphone and the room's volume shows live, as a meter or as bouncing balls that jump higher the louder the class gets. Set the limit for the activity and the screen warns the class when they cross it. Pick glossy balls, emoji, numbers, bubbles or eyes, put it fullscreen on the projector, and let the screen do the reminding.

How to use the classroom noise meter

  1. Press Start listening (or Start bouncing in the balls view) and allow the microphone when the browser asks. The tool goes full screen and starts moving with the room. Press Esc to leave full screen.
  2. Drag the limit slider to the level you want for this activity: low for silent work, higher for group discussion.
  3. When the room stays over the limit, the screen flashes, the big status word turns to Too noisy! and a counter records the warning. Pick an alert to go with it: a beep, a shush, or no sound.
  4. Switch between Meter and Balls views with the buttons. In the balls view, choose a ball style (glossy, emoji, numbers, bubbles or eyes) and how many balls bounce.
  5. Put it fullscreen on the projector and leave it running while students work.

Press F to toggle fullscreen on the tool. Everything is saved in this browser only; nothing is uploaded.

How to use a bouncy balls noise meter in class

The noise meter works best when the class knows what each level means and the screen stays on while they work. These are the ways teachers use it most.

Agree the levels together

At the start of the year, try silent work, whispers and group discussion with the meter on screen. Students see and hear what each level means, then help you choose the limit for each activity.

Quiet reading

Set the limit low for silent reading and leave the balls view running. Younger students watch the balls stay still and quieten each other down.

Earn a reward

Agree a target, such as fewer than three warnings in a lesson, and add a point to the class scoreboard when the class meets it. The warning counter does the record keeping.

Science of sound

In a topic on sound, measure a whisper, normal talk, a clap and a dropped book, and compare the levels. Students see that louder sounds make the meter jump higher.

Wet play and indoor breaks

Leave the meter on the board during an indoor break, next to the traffic light set to the noise level you expect. The screen does the reminding, so the adult on duty does not have to keep raising their voice.

How does the bouncy balls noise meter work?

The page listens through your microphone and measures how loud the room is many times a second. That volume becomes a level from 0 to 100. In the balls view the level is the energy the balls get: a quiet room leaves them resting on the floor, normal talk makes them hop, and shouting sends them flying to the top of the screen.

Your limit is drawn across the screen as a dashed line. While the balls stay under the line the room is fine. When they keep flying past it, the big word above them changes from Nice and quiet to Getting loud and then Too noisy!, and the screen flashes red. Students don't need to read a number: they can see the balls going over the line.

The sensitivity slider decides how strongly the balls react to the microphone. Raise it in a big hall or with a weak laptop microphone, and lower it in a small room where a single voice already sends the balls high.

Bubble noise meter and the other ball styles

Bubbles are see-through, like soap bubbles, so the screen looks softer and calmer than it does with solid balls. That makes the bubble noise meter a good choice for reading and quiet work. Glossy balls are the classic look, emoji balls make faces younger children like, numbered balls suit counting games in the early years, and the eyes follow the direction they move, which is always a hit with infants.

Fewer, bigger balls are easier to follow from the back of the room. Lots of small balls give a busy screen that older students enjoy for group work. Change the style and the number at any time without stopping the meter.

Frequently asked questions

Is this noise meter for classroom use free?
Yes, completely. Every ball style, the alerts and fullscreen are free, with no sign-up, no trial and no watermark.
Do I need to install anything?
No. It is an online noise meter for classroom computers, laptops and interactive whiteboards that runs in the browser, so nothing is installed on the school machine. It also opens on Chromebooks.
Is the sound recorded or sent anywhere?
No. The page reads the microphone's volume level inside your browser and throws the audio away instantly. Nothing is saved and nothing leaves the device. You can check this in the browser's privacy indicator, which shows the microphone in use but no network activity.
Why does the browser ask for permission?
Any web page that uses the microphone must ask. Allow it once and the browser remembers for this site, or choose allow for this session only.
The meter barely moves. What should I do?
Use the sensitivity slider to boost the input. Laptop microphones vary a lot, and some operating systems reduce microphone gain by default. If the computer has more than one microphone, a Microphone menu appears once listening starts, so you can pick the one nearest the class.
Can I change what counts as too loud?
Yes. The limit slider sets the threshold. The warning triggers after the room stays above it for about a second, so a single dropped pencil does not set it off.
Does it work on a tablet?
Yes, in Safari on iPad and Chrome on Android. The microphone permission prompt appears the same way.